How do I know what size bike tube I need?
How do I know what size bike tube I need?
The best way to check what size inner tube you need is to look on the sidewall of your tyre. Tyre manufacturers print the size on the sidewalls, so look out for numbers such as ‘700x23c’ for a road bike, or ’26×1. 75′ which is for mountain bikes.
Does bike tube have to be exact size?
While your diameter measurement needs to be exact, your width measurement does not. Because inner tubes stretch, they typically come in a range of widths. For example, one of our most popular tubes is the 26 x 1.75-2.125” which means it fits a 26-inch diameter tire with a width in the range of 1.75 to 2.125 inches.
Is tube size same as tire size?
The tube should match the tire size diameter closely. However, tires that are close in bead diameter may use the same inner tube. For example, an inner tube for an ISO 630 tire (27-inch) will also fit an ISO 622 (700c) tire.
Can I use a 29 inch inner tube for 700c?
So a 29 inch MTB tube will have the same diameter as a 700c road wheel, while a 27.5 inch tube will be the same diameter as a 650b road wheel. You can also get 26 inch MTB tubes. But since MTB tyres are typically wider than road tyres, they may be too wide to fit, even in a gravel bike tyre.
How do I know my tube size?
To find it, measure around the circumference of the pipe with flexible measuring tape. Divide the circumference by pi, or about 3.14159. For example, if the circumference is 12.57 inches (319 mm), you would divide by pi, and get an outside diameter of about 4 inches (100 mm).
How do you size a tube?
Tubing is measured by the OUTSIDE DIAMETER (O.D.), specified in inches (e.g., 1.250) or fraction of an inch (eg. 1-1/4″). Pipe is usually measured by NOMINAL PIPE SIZE (NPS).
